STI

STI(4)

AerieBSD 1.0 Refernce Manual

STI(4)

NAME

sti — HP Standard Text Interface

SYNOPSIS

.Cd "sti* at mainbus0" .Cd "sti* at phantomas0" .Cd "sti* at sgc?" .Cd "sti* at pci?" .Cd "wsdisplay* at sti?"

DESCRIPTION

The sti was created by HP to provide uniform frame-buffer access operations for their 9000/300 and 9000/700 series of workstations.

The following models are supported (though not all features or frame buffer depths may be available):

Model	Bits	Mem	3D	Machines/Cards
EVRX	8	2			HP9000/425e
GRX	8g	2			SGC
CRX	8	2			SGC
Tomcat	8	2			SGC
Stinger	8	2			HP9000/7[12]5/74[257]i
Artist	8	2			HP9000/712/7[12]5/74[38]i
CRX-24	24	16			SGC
HCRX-8	8	2			GSC
HCRX-24	24	16			GSC
Visualize EG	16	2			HP B/C-class, GSC/PCI
Visualize FXE	24	24	y	PCI 32/66
Visualize FX2	24	24	y	PCI 64/66
Visualize FX4/FX6	24	32	y	PCI 64/66

Implementation consists of a set of functions burnt in to the PROM on the card and providing the following set of functions (see below for PROM revision history on functions supported by particular PROM revision):

Initialize graphics.
State management.
Print a character onto the screen using currently selected font.
Copy a region of the frame-buffer to another location.
Self testing.
Exception handling.
Frame-buffer configuration enquiry.
Setting colour-map entry.
DMA parameters.
Flow control.
User timing.
Processing management.
Miscellaneous utility functions.

There are two modes for accessing the PROM: “byte” and “word” mode. In “byte” mode each 4-byte word contains only the low-ordered big-endian byte of data; i.e., to compose one word of data 4 words should be read and low-ordered bytes of those should be shifted correspondingly. In “word” mode each word contains all 4 bytes of valid data.

PROM revision history:

8.02

Original release.

8.03

OSF-extended self test (a.k.a fast).
Restore display.

8.04

Implement curr_mon function.
Graphical boot screen.
Implement “block move”.
Implement “set colour-map entry”. sti Implement word mode.
Support for multiple monitors.
Support user_data sti space usage.
Support for extra memory.
Support for WindowsNT (tm).
Monitor frequency reference.
Early console.
Support added for: PCXL, GSC bus, ROM-less operation.

8.05

Interrupt support.
Report card's power usage.
Birds of Prey.
User interrupts.

8.06

Multiple fonts.
Monitor table descriptor strings.
PCXL2 and PCXU monitor descriptors.

8.08

HP-UX 10 support for Visualize FX
dma_ctrl function added.
flow_ctrl function added.
user_timing function added.

8.09

Addition changes for VisualizeFX due to rearchitecture for performance.
process_mgr function added.

8.0a

PCXL2 and PCXU dual PCI EPROM map mode, implemented on VisualizeEG.

8.0b

Support for HP-UX non-implicit locking DMA, implemented on VisualizeFXE.

8.0c

sti_util function added (flashing under HP-UX and other sideband traffic).

8.0d

Colour frame buffer support.

HISTORY

The sti driver was written by Michael Shalayeff ‹mickey@lucifier.net› for HPPA port for OpenBSD 2.7.

BUGS

Currently, neither scroll back nor screen blanking functions are implemented.

AerieBSD 1.0 Reference Manual

March 12 2009

STI(4)

NAME

SYNOPSIS

DESCRIPTION

SEE ALSO

HISTORY

BUGS